The Canon Printer error code B200 generally indicates a defective print head, however there might be other causes. The print head is responsible for distributing ink from printer cartridges to the paper. Following the basic troubleshooting procedures suggested later on this page can typically resolve the issue B200 Canon Printer. The following are some of the most common causes of the Canon pixma g400 error code B200 -
Poor peripheral device quality
Cartridges from other countries are used.
Ink cartridges installed incorrectly
Printerheads that are dirty
Why the Canon printer error code B200 occurs?
The B200 error indicates a faulty print head at its most basic level. A print head is a part that distributes the ink from the cartridges onto the paper, meaning it's one of the most critical aspects of the entire printer. Print heads can be problematic, especially on cheaper printers
Why does Canon Pixma g4000 error code B200 Occur?
Make sure printer is turned on.
If the printer cannot be turned on, unplug it and go to step 4.
If an error has occurred, press OK button.
After the Alarm lamp is turned off, go to step 3.
If the error is not cleared, press ON button to turn the printer off, and then unplug it. If the printer cannot be turned off, unplug it. Go to step 4.
Set printer to transporting mode.
Press the Setup button, use the Left Right button to select Maintenance, and press the OK button.
LCD and Operation Panel
Use the Left Right button to select Lock transport pump and then press the OK button.
Use the Left Right button to select ON and then press the OK button.
The printer is set to transporting mode and turned off.
Confirm that the ON lamp is off and unplug the power cord.
Regards,
Willjoe